rp-test/i2c.c

/* @brief This is a simple application for testing IIC communication on a RedPitaya
* @Author Luka Golinar <luka.golinar@redpitaya.com>
*
* (c) Red Pitaya  http://www.redpitaya.com
*
* This part of code is written in C programming language.
* Please visit http://en.wikipedia.org/wiki/C_(programming_language)
* for more details on the language used herein.
*/


#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <linux/ioctl.h>
#include <sys/ioctl.h>
#include <linux/i2c-dev.h>
#include <string.h>
#include <unistd.h>
#include <errno.h>
#include <stdint.h>


#define I2C_SLAVE_FORCE                0x0706
#define I2C_SLAVE                              0x0703    /* Change slave address            */
#define I2C_FUNCS                              0x0705    /* Get the adapter functionality */
#define I2C_RDWR                               0x0707    /* Combined R/W transfer (one stop only)*/


#define EEPROM_ADDR                    0x50

/*
* Page size of the EEPROM. This depends on the type of the EEPROM available
* on board.
*/
#define PAGESIZE                   32
/* eeprom size on a redpitaya */
#define EEPROMSIZE                 64*1024/8


/* Inline functions definition */
static int iic_read(char *buffer, int offset, int size);
static int iic_write(char *data, int offset, int size);

/*
* File descriptors
*/
int fd;

int main(int argc, char *argv[])
{
    int status;

    /* Read buffer to hold the data */
    char *buffer = (char *)malloc(EEPROMSIZE * sizeof(char));

    char data[] = "THIS IS A TEST MESSAGE FOR THE I2C PROTOCOL COMMUNICATION WITH A EEPROM. IT WAS WRITTEN FOR A REDPITAYA MEASURMENT TOOL.";
    size_t size = strlen(data);

    /* Sample offset inside an eeprom */
    int offset = 0x100;

    /*
    * Open the device.
    */
    fd = open("/dev/i2c-0", O_RDWR);

    if(fd < 0)
    {
        printf("Cannot open the IIC device\n");
        return 1;
    }

    status = ioctl(fd, I2C_SLAVE_FORCE, EEPROM_ADDR);
    if(status < 0)
    {
        printf("Unable to set the EEPROM address\n");
        return -1;
    }

    /* Write to redpitaya eeprom */
    status = iic_write((char *)data, offset, size);
    if(status){
        fprintf(stderr, "Cannot Write to EEPROM\n");
        close(fd);
        return -1;
    }

    /* Read from redpitaya eeprom */
    status = iic_read(buffer, EEPROM_ADDR, EEPROMSIZE);
    if (status)
    {
        printf("Cannot Read from EEPROM \n");
        close(fd);
        return 1;
    }

    printf("eerprom test successfull.\n");

    /* Release allocations */
    close(fd);
    free(buffer);

    return 0;
}

/* Read the data from the EEPROM.
*
*  @param    read buffer -- input buffer for data storage
*  @param    off set     -- eeprom memory space offset
*  @param    size        -- size of read data
*  @return   iicRead status
*
*  @note     None. */

static int iic_read(char *buffer, int offset, int size)
{
    ssize_t bytes_written;
    ssize_t bytes_read;
    uint8_t write_buffer[2];

    /*
    * Load the offset address inside EEPROM where data need to be written.
    * Supported for BigEndian and LittleEndian CPU's
    */
    write_buffer[0] = (uint8_t)(offset >> 8);
    write_buffer[1] = (uint8_t)(offset);

    /* Write the bytes onto the bus */
    bytes_written = write(fd, write_buffer, 2);
    if(bytes_written < 0){
        fprintf(stderr, "EEPROM write address error.\n");
        return -1;
    }

    /*
    * Read the bytes.
    */
    printf ("Performing Read operation.\n");

    /* Read bytes from the bus */
    bytes_read = read(fd, buffer, size);
    if(bytes_read < 0){
        fprintf(stderr, "EEPROM read error.\n");
        return -1;
    }

    printf("Read EEPROM Succesful\n");

    return 0;
}


static int iic_write(char *data, int offset, int size){

    /* variable declaration */
    int bytes_written;
    int write_bytes;
    int index;

    /* Check for limits */
    if(size > PAGESIZE){
        write_bytes = PAGESIZE;
    }else{
        write_bytes = size;
    }

    /* Number of needed loops to send all the data.
    * Limit data size per transmission is PAGESIZE */
    int loop = 0;

    while(size > 0){

        /* buffer size is PAGESIZE per transmission */
        uint8_t write_buffer[32 + 2];

        /*
        * Load the offset address inside EEPROM where data need to be written.
        * Supported for BigEndian and LittleEndian CPU's
        */
        write_buffer[0] = (uint8_t)(offset >> 8);
        write_buffer[1] = (uint8_t)(offset);

        for(index = 0; index < PAGESIZE; index++){
            write_buffer[index + 2] = data[index + (PAGESIZE * loop)];
        }

        /* Write the bytes onto the bus */
        bytes_written = write(fd, write_buffer, write_bytes + 2);
        /* Wait till the EEPROM internally completes the write cycle */
        sleep(2);

        if(bytes_written != write_bytes+2){
            fprintf(stderr, "Failed to write to EEPROM\n");
            return -1;
        }

        /* written bytes minus the offset addres of two */
        size -= bytes_written - 2;
        /* Increment offset */
        offset += PAGESIZE;

        /* Check for limits for the new message */
        if(size > PAGESIZE){
            write_bytes = PAGESIZE;
        }else{
            write_bytes = size;
        }

        loop++;
    }

    printf("\nWrite EEPROM Succesful\n");

    return 0;
}